Elevators play an important role as a means of transporting passengers. In the early stages of designing a building need to carry out the analysis and modeling of traffic flow on the basis of these data to make selection of the type, quantity, capacity, speed, service system, as well as the location of the elevators. Existing types of lifts satisfy even the most intricate ideas of the designer. Modern technologies allow to install a lift in a very confined space.
So, choose the type of lift is quite simple, since it depends on the actual purpose lift in the projected building. If you want to move only in the vertical load, then you will need a freight elevator. If the goods need to be moved horizontally – you need a transporter. To lift and lower access to patients will need hospital elevator. If the projected residential building or a hotel, buy a passenger lift. Prestige – let it be panoramic (panoramic). And if you want to save space, make the elevator without machine room. This lift will fit with all of its nodes in the mine. Do not forget to take care of people with disabilities by adding a few options to the normal lift. You can also set up a special lift wheelchairs to people with disabilities can without difficulty to visit your store. If you are designing a parking lot, the number of parking spaces can be significantly increased if it is multi-layered and it will be installed car elevator. Want even more parking spaces? Then you need automatic parking system. And yet, there are lifts with front and rear entrance. If you want passengers to move horizontally, place the travelator, and if on the diagonal – while the escalator. Accelerate the construction of the building using a special lift, in which you can navigate to the builders together with the load.